Skip to main content

Posts

Showing posts from 2020

Maneuvering Characteristics Augmentation System (MCAS)

  MCAS, or Maneuvering Characteristics Augmentation System, provides consistent airplane handling characteristics in a very specific set of unusual flight conditions. MCAS now contains multiple enhanced protections: Measurements from two Angle of Attack (AOA) sensors will be compared. Each sensor will submit its own data to the airplane’s flight control computer. MCAS will only be activated if both sensors agree. MCAS will only be activated once. MCAS will never override the pilot’s ability to control the airplane using the control column alone. MCAS ON 737 Max The Maneuvering Characteristics Augmentation System (MCAS)  flight control law  was implemented on the 737 MAX to mitigate the aircraft's tendency to  pitch up  because of the aerodynamic effect of its larger, heavier, and more powerful CFM  LEAP-1B engines  and nacelles.  The stated goal of MCAS, according to Boeing, was to provide consistent aircraft handling characteristics at elevated angles of attack in certain unusual

ATA Chapters

Air transportation Association (ATA) published a numbering system to learn and understand the technical features of an Aircraft The standard numbering system was published by the   Air Transport Association   on June 1, 1956.  While the   ATA 100   numbering system has been superseded, it continued to be widely used until it went out of date back in 2015, especially in documentation for   general aviation   aircraft, on aircraft Fault Messages (for Post Flight Troubleshooting and Repair) and the electronic and printed manuals. This commonality permits greater ease of learning and understanding for   pilots ,   aircraft maintenance technicians , and   engineers . The Joint Aircraft System/Component (JASC) Code Tables was a modified version of the Air Transport Association of America (ATA), Specification 100 code. It was developed by the FAA's, Regulatory Support Division (AFS-600). This code table was constructed by using the new JASC code four digit format, along with an abbreviate